Social and Legal Studios
ISSN 2617-4162
e-ISSN 2617-4170
Publisher: Lviv State University of Internal Affairs
Abstract
The relevance of this study is conditioned by the need for constant updating of the specialised knowledge of criminalists and introduction of the latest technologies into the crime investigation. The purpose of this study was to critically examine the best practices of using 3D technologies in crime investigation. Through a systematic review of scientific studies that present various methods of using 3D technologies in crime investigation, it was proved that the scientific discourse is experiencing a revival of the discussion on the use of 3D technologies. Researchers note a series of benefits from the use of such technologies: 3D scanners allow creating a digital model of a crime scene; 3D reconstructions allow determining the sequence of actions, establishing cause and effect relationships, and restoring the original appearance of damaged objects; 3D printed models clearly demonstrate certain features of objects. The analysis of the available literature on the subject helped to systematise the use of 3D technologies in crime investigation and to identify three key areas of application of 3D technologies in the practice of crime investigation: (1) visualisation of the scene; (2) classification, identification, and diagnosis of objects; (3) reconstruction of objects or events. The speed, accuracy, safety, non-destructive impact, and many other criteria noted by researchers suggest that 3D innovations can become an indispensable auxiliary tool for criminalists, investigators, and prosecutors. At the same time, the findings of the analysed tests demonstrated certain limitations and problems that accompany the practice of using these innovations. As a result of the review of scientific literature, it was concluded that the transfer of 3D technologies in law enforcement is impossible without understanding the economic and social benefits of innovative investment. The study defined the content of these benefits, and the system of measures aimed at intensifying innovation processes in this area. The practical significance of this study is that its findings can be used by technical and forensic support units and pre-trial investigation bodies in developing the latest tactics for collecting evidence, recording, processing, and using information on criminal offences for the needs of criminal justice
Keywords: 3D innovations; virtual model; pre-trial investigation; evidence; crime scene; digital documentation
Suggested citation
[1] 3D Laser Scanning: Positioning the Jury at the Scene of a Murder. (n.d.) Retrieved from https://media.faro.com/-/media/ Project/FARO/FARO/FARO/Resources/2021/01/15/22/31/Case-Study-3D-Laser-Scanner-positions-jury-at-the-scene-of-a- murder-ENG.pdf?rev=4a9e73d03cea43feaf6536a659d38227.
[2] Adamczyk, M., Hołowko, E., Lech, K., Michoński, J., Mączkowski, G., Bolewicki, P., Januszkiewicz, К., & Sitnik, R. (2017). Three-dimensional measurement system for crime scene documentation. Counterterrorism, Crime Fighting, Forensics, and Surveillance Technologies, 10441, article number 104410A. doi: 10.1117/12.2278489.
[3] Addo, K.A., & Jayson-Quashigah, P.N. (2021). UAV photogrammetry and 3D reconstruction: Application in coastal monitoring. In Unmanned aerial systems: Theoretical foundation and applications (pp. 157-174). Cambridge: Academic Press. doi: 10.1016/ B978-0-12-820276-0.00014-5.
[4] Baldino, G., Spagnolo, E.V., Fodale, V., Pennisi, C., Mondello, C., Altadonna, A., Raffaele, M., Salmeri, F., Somma, R., Asmundo, A., & Sapienza, D. (2023). The application of 3D virtual models in the judicial inspection of indoor and outdoor crime scenes. Proceedings of the Accademia Peloritana dei Pericolanti-Class of Physical, Mathematical and Natural Sciences, 101(1), article number 17. doi: 10.1478/AAPP.101S1A17.
[5] Beltrame, B., Fassina, G., Aprile, A., & Verzeletti, A. (2024). Bitemarks and 3D scanner: An objective comparison for bitemarks. A pilot study. Journal of Forensic and Legal Medicine, 102, article number 102639. doi: 10.1016/j.jflm.2024.102639.
[6] Bennett, M.R., & Budka, M. (2018). Digital technology for forensic footwear analysis and vertebrate ichnology. Germany: Springer International Publishing. doi: 10.1007/978-3-319-93689-5.
[7] Blahuta, R.I., Blikhar, V.S., & Dufenіuk, O.M. (2020). Transfer of 3D scanning technologies into the field of criminal proceedings. Scientific Innovation, 16(3), 88-95. doi: 10.15407/scinе16.03.084.
[8] Brough, A., Rutty, G., Villa, C., Colman, K., Dedouit, F., & Decker, S.J. (2019). The benefits of medical imaging and 3D modelling to the field of forensic anthropology positional statement of the members of the forensic anthropology working group of the International Society of Forensic Radiology and Imaging. Journal of Forensic Radiology and Imaging, 18(4), 18-19. doi: 10.1016/j.jofri.2019.07.003.
[9] Carew, R.M., French, J., & Morgan, R.M. (2021). 3D forensic science: A new field integrating 3D imaging and 3D printing in crime reconstruction. Forensic Science International: Synergy, 3, article 100205. doi: 10.1016/j.fsisyn.2021.100205.
[10] 
Colwill, S. (2016). Low-cost crime scene mapping: Reviewing emerging freeware, low-cost methods of 3D mapping and applying them to crime scene investigation and forensic evidence. Perth: Murdoch University.
[11] Daly, A., Mann, M., Squires, P., & Walters, R. (2021). 3D printing, policing and crime. Policing and Society, 31(1), 37-51. doi: 10.1080/10439463.2020.1730835.
[12] de Almeida, F.E.G. (2020). 3D printing and new security threats. Revista do Instituto Brasileiro de Segurança Pública, 3(7), 197-210. doi: 10.36776/ribsp.v3i7.92.
[13] Decree of the Ministry of Internal Affairs of Ukraine No. 1339 “On Approval of the Instruction on the Procedure for Involvement of Employees of Pre-trial Investigation Bodies of the Police and the Expert Service of the Ministry of Internal Affairs of Ukraine as Specialists to Participate in the Examination of the Scene of the Incident”. (2015, November). Retrieved from https://zakon. rada.gov.ua/laws/show/z1392-15#Text.
[14] Dufeniuk, O.M. (2023). Conceptual model of balance in criminal proceedings: Institutional, law application, personal levels. (Doctoral thesis, Lviv State University of Internal Affairs, Lviv, Ukraine).
[15] Errickson, D., Carew, R.M., Collings, A.J., Biggs, M.J.P., Haig, P., OʼHora, H., Marsh, N., & Roberts, J. (2022). A survey of case studies on the use of forensic three-dimensional printing in England and Wales. International Journal of Legal Medicine, 136(6), 1605-1619. doi: 10.1007/s00414-022-02872-4.
[16] Esposito, M., Sessa, F., Cocimano, G., Zuccarello, P., Roccuzzo, S., & Salerno, M. (2023). Advances in technologies in crime scene investigation. Diagnostics, 13(20), article number 3169. doi: 10.3390/diagnostics13203169.
[17] Galvin, R. (2020). Crime scene documentation: Preserving the evidence and the growing role of 3D laser scanning. London: Taylor & Francis.
[18] Gaub, F. (2019). Global Trends to 2030. Retrieved from https://ec.europa.eu/assets/epsc/pages/espas/ESPAS_Report2019.pdf.
[19] Global trends 2040: A more contested world. (2021). Retrieved from https://www.dni.gov/files/ODNI/documents/assessments/ GlobalTrends_2040.pdf.
[20] Griffiths, G., Liscio, E., Guryn, H., Le, Q., Northfield, D., & Williams, G.A. (2021). Inter-observer error for area of origin analysis using FARO Zone 3D. Science & Justice, 61(3), 291-298. doi: 10.1016/j.scijus.2021.02.006.
[21] Gupta, S.K. (2023). Forensic pathoradiology of virtual autopsy. Boca Raton: CRC Press. doi: 10.1201/9781003383703.
[22] Haleem, A., Javaid, M., Singh, R.P., Rab, S., Suman, R., Kumar, L., & Khan, I.H. (2022). Exploring the potential of 3D scanning in Industry 4.0: An overview. International Journal of Cognitive Computing in Engineering, 3, 161-171. doi: 10.1016/j. ijcce.2022.08.003.
[23] Hnatkivskyi, B. (2023). Justification of directions for improving state regulation of innovative investment. Eastern-European Journal of Enterprise Technologies, 6(13), 65-73. doi: 10.15587/1729-4061.2023.294761.
[24] Home, P.H., Norman, D.G., Wade, K., Spearing, E., & Williams, M.A. (2024). 3D scanning a crime scene to enhance juror understanding of Bloodstain Pattern Analysis evidence. Science & Justice, 64(3), 333-338. doi: 10.1016/j.scijus.2024.04.007.
[25] Jakobsen, S.R., Pedersen, C.C., Thomsen, A.H., & Hansen, K. (2023). 3D-print as a template for reassembly of skull fragments in a homicide case. Annals of 3D Printed Medicine, 12, article number 100137. doi: 10.1016/j.stlm.2023.100137.
[26] Jani, G., Johnson, A., Marques, J., & Franco, A. (2021). Three-dimensional (3D) printing in forensic science – an emerging technology in India. Annals of 3D Printed Medicine, 1, article number 100006. doi: 10.1016/j.stlm.2021.100006.
[27] Javaid, M., Haleem, A., Singh, R.P., & Suman, R. (2021). Industrial perspectives of 3D scanning: Features, roles and itʼs analytical applications. Sensors International, 2, article number 100114. doi: 10.1016/j.sintl.2021.100114.
[28] Kottner, S., Thali, M.J., & Gascho, D. (2023). Using the iPhoneʼs LiDAR technology to capture 3D forensic data at crime and crash scenes. Forensic Imaging, 32, article number 200535. doi: 10.1016/j.fri.2023.200535.
[29] Lee, E., Park, S., Jang, H., Choi, W., & Sohn, H.G. (2024). Enhancement of low-cost UAV-based photogrammetric point cloud using MMS point cloud and oblique images for 3D urban reconstruction. Measurement, 226, article number 114158. doi: 10.1016/j.measurement.2024.114158.
[30] Listek, V. (2023). 3D printed guns in Europe: Recent developments, legal complexities, and insights from an expert. Retrieved from https://3dprint.com/304988/3d-printed-guns-in-europe-recent-developments-legal-complexities-and-insights-from-an- expert/.
[31] Maiese, A., Manetti, A.C., Ciallella, C., & Fineschi, V. (2022). The introduction of a new diagnostic tool in forensic pathology: LiDAR sensor for 3D autopsy documentation. Biosensors, 12(2), 132. doi: 10.3390/bios12020132.
[32] Mânica, S., Boedi, R.M., Pandey, H., & Shields, C. (2024). Identifying teeth and tooth fragments from digital 3D models. Morphologie, 108(362), article number 100774. doi: 10.1016/j.morpho.2024.100774.
[33] Ospina-Bohórquez, A., Del Pozo, S., Courtenay, L.A., & González-Aguilera, D. (2023). Handheld stereo photogrammetry applied to crime scene analysis. Measurement, 216, article number 112861. doi: 10.1016/j.measurement.2023.112861.
[34] Pérez, J.A., Gonçalves, G.R., Barragan, J.R.M., Ortega, P.F., & Palomo, A.A.M.C. (2024). Low-cost tools for virtual reconstruction of traffic accident scenarios. Heliyon, 10(9), article number e29709. doi: 10.1016/j.heliyon.2024.e29709.
[35] Poliak, Y.P. (2022). The use of technical means in conducting investigative (search), covert investigative (search) actions and the use of its results during the pre-trial investigation. (PhD thesis, Lviv State University of Internal Affairs, Lviv, Ukraine).
[36] Rinaldi, V., Hackman, L., & NicDaeid, N. (2022). Virtual reality as a collaborative tool for digitalised crime scene examination. In International conference on extended reality (pp. 154-161). Cham: Springer International Publishing. doi: 10.1007/978-3-031- 15546-8_14.
[37] Shymanovskaya-Dianych, L., Chernikova, N., & Ishcheikin, T. (2021). The essence of the concept of “innovation potential” as an economic category. Business Navigator, 3(64), 63-69. doi: 10.32847/business-navigator.64-10.
[38] Stevenson, S., & Liscio, E. (2024). Assessing iPhone LiDAR & Recon‐3D for determining area of origin in bloodstain pattern analysis. Journal of Forensic Science, 69(3), 1045-1060. doi: 10.1111/1556-4029.15476.
[39] Tredinnick, R., Smith, S., & Ponto, K. (2019). A cost-benefit analysis of 3D scanning technology for crime scene investigation. Forensic Science International: Reports, 1, article number 100025. doi: 10.1016/j.fsir.2019.100025.
[40] Vargas, B.F., dos S., Coutinho, M.A., & Coutinho, F.S. (2021). 3D printing in forensic medicine and crime solving: Integrative literature review. Revista De Medicina, 100(1), 62-69. doi: 10.11606/issn.1679-9836.v100i1p62-69.
[41] Vidoli, G., Devlin, J., Watson, J., Kenyhercz, M., & Keller, J. (2020). Implications of three-dimensional laser scanned images for the criminal justice system. Washington: National Institute of Justice.
[42] Villa, C., Larsen, S.T., Hansen, K., Rohde, M.C., Haahr, M.K., Boel, L.W.T., Leth, P.M., & Jacobsen, C. (2024). Forensic imaging in Denmark, 20-year-experience: Status and future directions: A positional statement from the Danish Forensic Imaging Group, of the Danish Association of Forensic Medicine. Forensic Imaging, 36, article number 200583. doi: 10.1016/j.fri.2024.200583.